 |
 |
 |  |
|  |
|  |
|  |
|  |
|  |
|  |
 |
|
|
|
Option parts for AE RC8/B Prices excluding tax. See "ordering info" for moore information
Always use your local reseller if there is one |
GHEA2071
AE RC8/B 0.5 degree delrin inserts 1.5 dot
108 sek/4 pcs
|
|
|
GHEA2039
RC8/B hardanodized rear hub spacers for long life and low resistance
65 sek/4pcs
|
|
|
GHEA2020S
Joint cup sleeve for GHEA2020 hardanodized champagne
104 sek
|
|
|
GHEA2038
RC8/B shock cap inserts rounded on inside. made from delrin
54 sek/4 pcs
|
|
|
GHEA2012G1
RC8 upper hinge pin treaded for easy work with the front end. Hardened high alloy steel
81 sek/2pcs
|
|
|
GHEA2046
RC8/B Chassis brace kit
184 sek
|
|
|
GHEA2049
GHEA Block system For RC8/B hardcoated Champagne The toughest blocksystem there is
662 sek
|
 |
|
GHEA2019
Hinge pin 4x67 for the GHEA Block system
125 sek/4 pcs
|
 |
|
GHEA2043
RC8/B antisquat block (C) for the GHEA block system
189 sek
|
 |
About the inserts angle
same as stock |
GHEA2042
RC8/B B-block for the GHEA block system
143 sek
|
 |
About the inserts
3 dot out are the same as stock |
GHEA2044
RC8 Toe (D) block adjustable 1-5 degree for the GHEA block system
143 sek
|
 |
About the inserts
1 dot = 3 degree same as stock |
GHEA2041
RC8/B Gear box Drilled 4.2mm for the M4 bolt trough
96 sek
|
 |
|
GHEA5010
M4X70 bolts for the GHEA block system
78 sek/4pcs
|
 |
|
GHEA5007
M4X6 special for GHEA D-block
27 sek
|
 |
|
GHEA2040
RC8/B Upper diff mount Made made from al. 7075-T6 heat resisted
202 sek
|
 |
|
GHEA2023HC
RC8/B steeringpost Hardcoated with delrin bushings GHEA3020
176 sek/pair
|
 |
|
GHEA2037 RC8/B option steering ball kit Hardcoated 7075-T6
57 sek
|
 |
|
GHEA2034
RC8/B Ball kit
203 SEK
|
 |
|
GHEA2008
RC8/B worlds kit Less friction Less rotating mass Less weight weight 62gr saves 91gr 1215 sek
|
 |
This kit were used by all RC8 drivers at the worlds 2008 in U.S
|
GHEA2036
AE RC8/B al.kit include all M5 screws
540 SEK
|
 |
|
GHEA2026
AE RC8/B Stand off Hardcoated AL.7075-T6 weight 0.8GR/pcs
81 SEK/pair
|
 |
|
GHEA2033
AE RC8/B Stand off Made from hardened steel forthe front tower
54 SEK/pair
|
 |
|
GHEA2022
AE RC8/B Wheelshaft /R Made from AL 7075-T6 to reduce the rotating mass. Weight 6 gr
162 SEK/pair
|
 |
|
GHEA2021
AE RC8/B WHEELSHAFT/ F Made from AL7075-T6 to reduce the rotating mass. weight 5gr.
151 sek/pair
|
 |
|
GHEA2020
AE RC8/B JOINT CUP Made from AL.7075-T6 to reduce the rotating mass. weight 4gr 143 SEK/pair
|
 |
|
GHEA2012
AE RC8/B Hingepin upper front titanium Grade 5 4x36.5mm weight 2gr
95 sek/pair
|
 |
|
GHEA2013
AE RC8/B Hinge pin out/R 3mm axle,M3 tread hardened high alloy steel int. 2mm insex
103 sek/pair
|
 |
|
GHEA2014
AE RC8/B Hinge pin out/F 2.5mm axle,M2.5 tread,hardened high alloy steel int.2mm insex
95 sek/pair
|
 |
|
GHEA2024HC
RC8/B 50 mm Turnbuckle For option steering hardcoated al.7075-T6
108 sek/pair
|
 |
|
GHEA2025
RC8/B Brake cams Made from al.7075-T6 hardcoated to reduce wear and friction. saves 8gr weight 2gr/pcs
135 sek/pair
|
 |
|
GHEA3090
RC8 Tapered piston kit incl.3051,3056,30561,3058 and the magic 3059
475 sek
|
 |
|
GHEA3051
16mm tapered piston with 10x1.1 holes. Fits AE big bore
130 sek/4pcs
|
 |
|
GHEA3056
16mm tapered piston with 8x1.3 holes. Fits AE big bore
130 sek/4pcs
|
||
GHEA3059
16mm tapered pistons 8x1.3 angle drilled holes. Fits AE big bore
145 sek/4pcs
|
 |
|
GHEA30561
16mm tapered pistons 8x1.45 for the rough conditions fits AE big bore
130 sek/4pcs
|
