GHEA2013logo.png

 

           

Acceptance Mark

 

 

 

 

                                                              

   

                                                     

 

 

 

 

 

                                           

                                                

 

 

 

 

  

 

 

tko

 

 

 

 

 

 

 

 

 

 

 

                                                                             

                                                                                         News

GHEA9020

Piston storage box.

This is a small box suited for 16mm pistons or smal parts.

piston-storage-002.jpg

GHEA2160BR

GHEA racing brass bulkhead kit for AE B5/B5M.

Just rotate the bulkhead to change between 25 or 30 degree kick up.

The kit Includes brass bulkhead,front brace delrin,2 socket head screws M3X10,2 set screws M3X3 and 2 spacers.

GHEA2160BR.jpg

GHEA2160AL

GHEA racing aluminium bulkhead kit for AE B5/B5M.

Just rotate the bulkhead to change between 25 or 30 degree kick up.

The kit Includes aluminium bulkhead, front brace delrin,2 socket head screws M3X10,2 set screws M3X3 and 2 spacers.

GHEA2160AL.jpg

GHEA2076

Centro C4.2 rear bulkhead made from Aluminium 7075-T6 and hard coated.

Includes the B44 wing mount spacer.

c4.2-rear-bulkhead-hardcoated-002.jpg

C4.2-REAR-BRACE-HARDCOATED-004.jpg

GHEA2080

Centro C4.2 narrow pivot kit made of Al.7075-T6 and hard coated.

c4.2-narrow-pivots-hardcoated-002.jpg

GHEA2090,GHEA2091,GHEA2092

AE B4,B44,T4 etc.And Centro C4.2 captured pins including M2.5 nyloc nuts.

captured-pins-001.jpg

captured-pins-002.jpg

Mugen MBX7 hardanodized pivot balls increase the life span and keep the play at a minimum

for a long time.

MBX-7-hardcoated-sway-bar-kit.jpg

GHEA4015 Sway bar kit

MBX-7-hardcoated-lower-shock-kit.jpg

GHEA4016 Lower shock kit

MBX-7-hardcoated-rear-camber-lik.jpg

GHEA4017 Rear camber link kit

MBX-7-hardcoated-steering-link.jpg

GHEA4018 Steering link kit

GHEA4012

Lightened wheel hexes +1mm offset for Mugen MBX7 made of al.7075-T6 and anodized titanium.

GHEA4013

Lightened wheel hexes +2mm offset for Mugen MBX7 made of al.7075-T6 and anodized titanium.

MBX-7-LIGHTENED-WHEEL-HEXES.jpg

GHEA9005

”Middle shaft for HotBodies R10, for use with XRAY Plastic pulleys

Enables use of XRAY or similar plastic/kevlar pulleys on the middle shaft on the Hot Bodies R10. The pulleys mount via sturdy pin-and-clip construction and minimizes the risks of loosing a pulley, and depending on the pulleys chosen, might minimize friction in the driveline. This item is similar to what was used by the HB team during the 2012 IFMAR WC’s. Made out of titanium and includes an aluminium spacer.”

HotBodies-R10-middle-shaft.jpg

Ride height gauge GHEA6010 and GHEA6015

One revolution is all it takes to adjust this tool from (20 to 30MM GHEA6010)(15-20 GHEA6015)

in 1 millimeter click steps.

    GHEA-ride-height-tool-001-copy-2.jpg             GHEA-ride-height-tool-002-copy-3.jpg

GHEA7002

X-ray XB9 A plate made from steel

The weight is 30 grams and will increase high speed steering

              

    XB9-a-plate-steel.png                      

GHEA2055AL

AE,CML C4 Aluminium (7075-T6) bulkhead.10grams only with the possibillity to add weight.

AE-B4-aluminium-bulkhead-kit-002.jpg

GHEA8008AL

Kyosho RB6 aluminium (7075-T6) bulkhead.10 grams only.

Aluminium-bulkheads-001.jpg

A GHEA"pack rack" is a range of pistons that is oil weight balanced regarding the low speed

damping, which means when you change piston to increase or decrease pack you will not change

the low speed damping.

All the pistons included is possible to purchase individual.

                                                   GHEA8125-PACK-RACK.jpg

GHEA8119

Kyosho 12mm tapered piston kit "pack rack" tested during this indoor season by David Ronnefalk

and Christoffer Svensson with great success.

The kit includes 2,3,4,5 and 6 hole pistons based on 4X1.2 in the middle of the pack range.

GHEA2125

AE,TLR 12mm tapered piston kit "Pack rack" tested during this indoor season by Nicklas Nille Månsson

with great success.

The kit includes 2,3,4,5 and 6 hole pistons based on the 4X1.3 in the middle of the pack range.

GHEA8125

Kyosho 12mm tapered piston kit "pack rack" based on the much appreciated GHEA8114 (4X1.3)

in the middle of the pack range.

The kit includes 2,3,4,5 and 6 holes pistons.

GHEA8115

Kyosho RB5/6 12mm tapered piston 2X1.4 released.

This is a high pack piston for smooth tracks with hard landings.

                                              GHEA2101-CAPS.jpg

 

GHEA2101

RC8.2 big dome shock caps made from al.7075-T6 and hard coated for long life.

                                                B4.1-brass-ackermann.jpg

 

GHEA2059

AE B4.1 brass Ackermann plate adds 15g to your steering rack

                                                B4.1-under-bellcrank-wight-001.jpg

 

GHEA2085

This piece of brasss adds 10 grams under the bellcrank on your AE B4.1

 

                                                GHEA-lrc-plates-rear-005.jpg

This is our Low Roll Center plates for the Associated 1/8th scale family of vehicles. This new product is made from Swiss 7075-T6 aluminum, and new design allows you to change the hinge pin height which affects the roll center and how the car handles. Toe-in is set at 3 degrees.

GHEA2044-2 Low roll center D plate for AE RC8 standard inserts

GHEA2043-2 Low roll center C plate for AE RC8 standard inserts

Check the GHEA LRC plate chart

                                   16mm-4-hole-tapered-pistons.jpg

How many times have you wondered what pistons and oil you need to get more or less pack without

changing the low speed damping and affect chassis roll and generall handling?

Now,every time you race at a new track, we know this is one of the main issues when the car doesn't performes like you want it to.

From now on you will only need to change the piston to get the pack you want.

                                                      We call it "Pack control"

We start out with the 16mm big bore pistons for AE RC8.2 which also will fit the X-ray XB9,Kyosho MP9,

Hong nor Sabre,etc.

                                                 

GHEA3044  16mm tapered 4 holes piston with 20% more pact compare to GHEA3056 8x1,3

                   with equal oil wt.

GHEA3046  16mm tapered 6 holes piston with 10% more pack compare to GHEA3056 8x1.3

                   with equal oil wt.

GHEA30414 16mm tapered 14 holes piston with 10% less pack compare to GHEA3056 8X1.3

                    with equal oil wt.

GHEA8113

Kyosho 12mm tapered piston 3X1.3 for You who needs more pack.

This is a high recommended piston for smooth tracks with hard landings for your RB5

GHEA3174

TLR22 tapered pistons 3X1.3 for all of you that needs more pack

GHEA2070

AE B4/B44/T4 Convert collars for big bore springs

in stock

                                                                                                                            B4-Collars-003.jpg

GHEA8002

Kyosho RB5 SP2 Brass bulkhead in stock.

  

Back in stock!! GHEA2058 Front brace                                         b4-front-brace-brass-BACK-IN-STOCK.jpg

                            

From now on the AE Pistons GHEA2065 and GHEA2067 will be sold as rev.1

We have change the hole dia.from 1.35 to 1.3 on GHEA2065 and from 1.25 to 1.2 on GHEA2067

This is because we want to getting closer GHEA2068 which is 1.1mm

GHEA2065F

AE B4/B44/T4 #2 2X1.3 flat pistons for smooth surface

GHEA2067F

AE B4/B44/T4 #3 2X1.2 flat pistons for smooth surface

GHEA0011

Ansmann 10th scale tapered pistons 6x1.1

GHEA0012

Durango 10th scale big bore tapered 6x1.1

GHEA0013

Durango 10th scale big bore tapered 6x1.2

GHEA0014

Durango 10th scale big bore tapered 6x1.3

                                                             

                                                                                                        

GHEA2068                                                                                                       

AE B4/B44 tapered piston nr.4

GHEA3003S

Clutch shoe std.soft for more bite

GHEA8110

RB5 12MM Tapered pistons 5x1.1

GHEA8111

RB5 12MM Tapered pistons 5x1.2

GHEA8112

RB5 12MM Tapered pistons 5x1.3

GHEA3175

TLR 22  12MM Tapered pistons 4x1.1

GHEA3176

TLR 22 12MM Tapered pistons 4x1.2

GHEA3177

TLR 22 12MM Tapered pistons 4X1.3

GHEA3178

TLR 22 12MM Tapered pistons 4X1.4

GHEA3031

Covered super light wheel nuts anodized titanium look in stock

GHEA0021

Durango DEX 408 tapered pistons 6x1.3 in stock

GHEA0022

Durango DEX 408 tapered pistons 6x1.4 in stock

GHEA33212

Ceramic diff balls fits most 10th buggys

GHEA33214

Ceramic diff balls for TLR 22 14pcs/set

 

 

 tapered piston

wheel-nuts-002.jpg

ghea3080

332diffballs.jpg

  

Share |